Knowledge Base:  
You are here: Knowledge Base >
How to attach microfiber mop handle to frame
Last Updated: 02/19/2024

Microfiber Mop Pad attachment instructions

We supply two different styles of aluminum microfiber mop pad frames. These come in sizes ranging from 10" to 48", and all of these sizes attach to handles and pads the same way. This will be a step-by-step guide on attaching the frame to the handle.

Step 1: Remove plastic bagging from hardware.
Step 2: Unscrew the coupler and set it aside.
Step 3: Unscrew the wingnut/screw and set it aside.
Step 4: Flip the aluminum mop handle upside down so the black plastic handle end is on the ground.
Step 5: Slide the coupler on to handle with the thicker side up.
Step 6: Slide the aluminum frame onto the aluminum end of the mop handle.
Step 7: (Optional) Insert screw and tighten wingnut through frame/handle hole.
Step 8: Tighten the coupler around the frame and handle to create a secure connection.
Step 9: Flip the microfiber mop handle/frame combo over and drop centered onto the microfiber mop cleaning pad.


Was this article helpful?

Comments: